Jewelry: Sorted

I love jewelry. I don't have a lot of it, but that's changing. I own a beautiful silver-toned jewel box, but it doesn't hold everything. This means my baubles make a mess of my nightstand or get tangled in a bag.  I decided that it would be nice to create a nice display organizer to go over my night stand. This would be my second attempt at a solution actually. The last one was a minor disaster and an even bigger eyesore. I didn't even bother to photograph it. This is better. Just better.

I started with two old store bought pictures that I didn't have a place for in my house. The frames on them were gorgeous, and I came to realize that's why I still had them. They had sage colored mats however, and that did not fit the plan. In fact, that just made the mats look dingy. Black acrylic paint solved this problem nicely. I used a dry brush and applied the paint sparingly and the result gave it a woody, natural looking texture. Next,  I prepared the cardboard backing from the original picture by covering it in craft foam sheets in black. I just used my hot glue gun for this because I  was feeling impatient and didn’t want to wait for white glue to dry. Also using hot glue, I covered the padded side of the board with a fat corner of black fabric. This all got reassembled (minus the picture) into the frame. This was easy for this frame because I didn’t have to remove any of the staples that secure everything in place.

This is the cardboard backing covered in foam. I had just enough!

To actually have somewhere to place the jewelry, I turned to wine corks. I have a collection of these as well. I chose the cheap artificial ones for this because I have more of these and because of their uniformity. For post earrings I cut the corks in half and wrapped them with silver-toned wire strung with purple glass seed beads. I attached them using screws and hot glue. Run the screw through the back of the board to the front the screw the cork about halfway onto the screw. Add a drop of hot glue, then finish attaching the cork. Add a drop of ho glue over the head of the screw for extra security. The earrings just slip into the cork, and I only keep the backs in the jewelry box.

For bracelets and rings, I used whole corks with divots carved into the sides. I decorated these with more wire, and a silver mother of pearl at each end of the cork. I attached these one at either end of the inner mat using the previous technique. The rings are placed on bamboo sticks that lay in the grooves. For the bracelets I glued several sticks together for strength. The rings and bracelets get placed between the corks and nothing slides off.

I love this so far. Another part that I love is that I can add to it. As you can see, I began using it before adding a second row of earrings and the bracelets. I have the other frame to use for necklaces, but I haven't decided on a design there yet. There are quite a few of chains, beads, and ribbons, and some are quite long, so I want to get it right. At any rate, I hope this design inspires you to create something good looking and useful out of your odds and ends. Please feel free to drop me a comment below, and be sure to check back every so often. I have a few other projects in the works that I can't wait to finish and share with you. Some even involve antiques!

A Simple Fabric Covered Box

Hello again crafty budgeters. I had a free evening and a small annoyance to tackle recently and so I stopped procrastinating and got to work. Hubby and I sit daily on our full-sized couch. Its soft and comfy and gives us way to much space too plop things down on the cushion in the center. Seriously, remotes, cell phones, notebooks, mice and keyboards, etc. It gets to the point where we start knocking things off and blaming each other for pushing in back and forth. My solution comes in the form of a small cardboard box, two fat quarters, Elmer's glue, and and some foam padding.

This little box was the perfect size for my needs. Just big enough to contain the junk that made simply sitting down a chore. I colored the outside of the box black to avoid its previously white and black print to show through. Frozen juice concentrate is not the look I was aiming for after all. I then cut a piece of the black fabric large enough to cover the entirety of the outside of the box, as well as the inside upright edges. I affixed it to the box with a thin coat of Elmer's white glue as though I were wrapping a gift and adding more glue to the flaps. The patterned fabric was used to cover the foam pad I added to the bottom. This was done to reduce the noise and potential damage of things being tossed in carelessly (yes, referring to myself).

  

That last application of glue necessitated the extra inserts seen above. I simply sized two thin pieces of card stock from junk mail and glued a bit of the patterned fabric neatly to them. I glued them over the messy flaps. So much better.

Here's everything all neatly assembled. Since I literally bought nothing for this project I cannot accurately give an idea of the costs. I often pick up fabric remnants and fat corners on clearance, and I had these on hand already. I've also been known to re-purpose other sources of material from sheets, old clothes, etc. so get creative. Let me know what you think of this quickie craft in the comments below.

Also, I need a wall-mountable jewelry storage solution. Any ideas?

Where I Get Ideas to Try

Hello fellow budgeters! I've been away for quite awhile, I know. Things have been a special kind of crazy in my life ranging from no car (resolved) to training for a new position at work. Family changes have been a constant too, so I haven't had the time to tackle many household annoyances or try many crafts.

Now that I'm getting used to my new schedule and family obligations I have decided that it is time to reclaim my thrifty creativeness. While I do have many original ideas born of necessity, I often base ideas on things, posts, videos, and tutorials I see both in real life and online. I thought I would share some of these ideas with you to help get your creative juices flowing.

Pinterest

This is routinely my first stop. Other people have scoured the internet looking for solutions to problems, and have kindly placed links to them all in one easy to find place. I mostly use this for recipes, but I'd be lying if I said that was all. I find that unless you have ample time to scroll through the likely millions of posts available,  searching Pinterest by keyword is the way to go. I also find that sorting posts that I save helps to find them when I need them. I've even begun a board just for this blog to highlight the projects I've done here.

YouTube

I love YouTube. There are so many instructive videos that one can literally sit in front of it for hours and not even begin to scratch the surface of what is available. Jewelry design, life hacks, sewing tutorials, beauty DIYs, and technology how to's are just a few of the things I resort to YouTube for. Its not all fail and haul videos.

Hometalk

I have looked at Hometalk a few times in the past, but recently I have taken a closer look, and I am impressed! My countertops and cabinets were replaced a few months ago, and Hubby and I decided we wanted a backsplash. While we have put those plans on hold for a while, I found many ideas suitable for an apartment right on Hometalk. This is a great source for home décor and hack ideas.

Craft store sites (Michaels, Fire Mountain Gems, JoAnn's)

Retail sites have gone out of their way to ensure that you purchase what they're selling. One good side effect is that many craft supply sites will have free tutorials and patterns using the items that they sell. There are way too many to list here, but give it a try. You may be surprised. Don't forget to try product manufacturers too, such as Lion Brand Yarn, etc.

I hope this has been helpful. If so, please let me know in the comments. I love sharing gems like these, and would love to hear about any good sites you may have found. This is a topic I would love to revisit a bit more, and of course, find great new ideas!

Flower Pots for Next to Nothing pt. 1

When I moved into my apartment a few years ago, I was thrilled to have a tiny garden area I could play with. Small doesn’t really even begin describe the space, but its mine. Problem is, that being strapped for money, I couldn’t afford to buy much for the space. My neighbor worked as a landscaper at the time and was able to get me canna lilies, some sort of bamboo, some purple flower that grows on long vines that look like twigs (don’t know the name) and umbrella grass. I love his initiative, but these are all plants that grow wildly out of control. Rather than digging all of this up, I have come up with the idea of limiting them by covering them with potted flowers instead. Pots cost money though, and there just isn’t much (well any) to spare.

I started looking through my collected odd and ends and realized I had a few usable containers around the house. The one I started with was a small plastic Folgers Coffee can. Its bright red and obviously and old Folgers container so that needed changing. I remembered a post where a woman covered her whole floor in paper bags. It looked a bit like leather when it was done, and I liked that idea. I pulled out my trusty Mod Podge, a paint brush, a small paper bag and got to work. I ripped the paper bags into smallish pieces and applied them to the container making sure to overlap each of the pieces and the top and bottoms of the containers. Then I coated the entire outside in another layer of Mod Podge to weatherproof it. I like how it turned out, despite the fact that the red shows through. I paired the two I made in this style with red begonias (under $2 for a flat of 6 at Walmart). They look cute in the garden.

The first coffee can planter all finished and filled.

The terra cotta planter I already had made a good home too.

I haven’t come up with a plan for the next few planters. I have a few large coffee cans, plenty of glass bottles, and a few plastic bottles and jugs to work with. Any suggestions? Please leave them in the comments below.

Another Cat Toy Done on the Cheap

Willow (previously known as Test Kitten, T.K. for short) has grown, and so have her needs. She gained size, but lost none of her energy, and so needs more cat safe activities to keep her out of trouble. When I noticed how excited she got over some pool noodles that hubby and I bought (to be featured in  another project), I figured that would be the perfect building block for Willow's new scratchy-batty-chew toy.

Early test to see if she's even interested. She is!

The base was the side of a drawer from my soon to be replaced (fingers crossed) wardrobe. We stabilized it using small sections of pool noodle cut in half length-wise secured with duct tape . The longer vertical section of noodle was secured with my trusty Gorilla Glue.The fuzzy ladybug toy was from a package of assorted toys. She played with it maybe 3 times since getting it, and it had a dangle to tie it to something, so I did. I poked a length of ribbon through the top of the noodle and knotted it at a length to facilitate maximum swinging. 

Shortly after this pic, the toy was attacked from above.

I covered the base using some scrap fabric I had laying around. I figured she would think the duct tape was the real novelty and so this cover seemed like a good idea. It looks better too. Although this doesn't get as much love as some other toys, she still loves to beat this mercilessly. Another win on the cheap.

After many attacks a few weeks later. As you can see, it stands up to the Willow test.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

Preparing Old Wine Bottles for Upcycling

I have been collecting old wine and liquor bottles since we moved into this apartment. On occasion so bring them home from work, the rest are from cooking and personal consumption here at home. Since hubby gathered them all together and they filled a whole box, I figured I better use them.

My first project will be a set of small organizers for a small metal rack in my bedroom. The wire shelves make using some containers here troublesome, so I figure heave glass containers will be the perfect solution for holding combs, brushes, and other small items that always seem to get lost and tossed around. Plus it has to look better than the old shoe box I am using now.

The first step is to clean the bottles and remove the labels. I hit up Pinterest as usual and came across a very useful pin that compared label removal methods. To spare you the trouble of looking it up, soaking the bottles and a mixture of very hot water and baking soda works best. Since not all ornate bottles were clean, I decided to combine the cleaning and label removing steps and added dish soap to the soak water. It seems that the cheaper the wine, the harder it is therefore the label. Ok, there's nothing scientific in that, just observational. Also clear bottles seem to be a bit harder to work with - perhaps a stronger adhesive?

Here are my results from the first four bottles that I soaked. While I got all of the labels off, I am left with a bit of glue to clean up. Still, this is better than hours of peeling and scraping. To remove the left over residue, and even some left over sticker scraps from the second set I did (not pictured) I turned to canola oil. Just wipe a good layer over the affected areas and allow it to sit for a n hour or two. The oil beaks down the adhesive enough to be easily wiped or lightly scraped from the bottle. Then just wash away the oil with dish soap.

Here are the final results, all ready to be cut and decorated. I can't wait to get to the next step!

DIY Waste Basket from Upcycled Magazines (Redone)

Once upon a time while searching for craft ideas on the internet, I happened upon a site featuring recycled paper crafts. One young lady made sturdy and attractive baskets from old magazine pages. The idea stuck in my head, and when I found I needed a new bedside waste basket I knew what to do. While apartment hunting, we had picked up loads of visitors booklets and catalogs and luckily I knew where my glue sticks and hot glue supplies were. I even had an appropriately small box lid. I got to work rolling paper "logs" with the glue stick, and then fastening them to the lid using my hot glue gun. I loved the finished product and it served me well for 2 years. Then it got smashed. I decided it was time for an upgrade.

I regret to say that I have lost the original link for instructions on making the logs, but I have found another that covers it: Magazine Vase and Pencil Holder. The only difference is that I used glue sticks instead of Mod Podge.

Weaving the "logs" together

I spent a while testing it apart and picking off old bits of hot glue. Once I had the bare components of box lid and paper "logs," I got to work. Using 24 gauge wire, I wove the logs together in sort of a random basket weave. I could have been a bit neater, but I was aiming for strength. Since I had ripped some of the logs I had already decided that aesthetics were no longer an immediate priority.

I wove the wire at the bottom and center of the logs to create a long panel. Next, I returned to the original design by hot gluing the panel to the lid. I then added glue between the logs. The finished product is much stronger, (and a little lopsided - oops) so goal achieved. Now to decide how to decorate it...

My lopsided basket. I wove a little too tightly. I think if I make it look like twigs, the lopsidedness of it will look natural.

Cleaning Sand Dollars

This week, one of the servers in the restaurant I work for was given some sand dollars by a customer (along with a tip). He knows that I love to make stuff, so passed them to me to see what I could do with them. If you have ever picked up sand dollars on the beach before, you know that they aren't clean by any standard. In fact, they aren't even slightly white. These were brown, and a little fuzzy for lack of a better term.

Filthy sand dollars before soaking.

To get that creamy white color they must be cleaned first by a fresh water soak. I soaked mine for over 24 hours. This is largely because it was already 6 pm and the sun was required to finish the task. In the end, this was a good thing because most of the debris fell off in the last 6 hours. I also was careful to change the water a few times... it can get smelly!

Just added to bleach. See how much cleaner they look already.

Follow the soak with a ten minute bleach bath followed by a good rinse.

Out of the bleach and into the sun.

The final step is a sun bleaching session. This should help with any yellowing. I did not have yellowing after the bleach, but a few grey and pink spots remained. The sun cleared these right up in two hours. Please keep in mind that the times I used here worked for these sand dollars. Dirtier ones may need more, and cleaner less. Use your best judgement.

Finished product.

In the end, I was left with 4 beautiful sand dollars ready for crafting for the price of a splash of bleach... total win.

Chicago Style Deep Dish Pizza

My husband and I met in the Chicago suburbs. I had lived in the region for my entire life, and my husband is from a military family, so after years of moving around the world, they settled there when he was in high school. Needless to say, the local treats of the area were a regular part of our daily lives. So now that we have been away for about four years, we are experiencing withdrawal symptoms. It is basically impossible to find Chicago style deep dish pizza in the pan handle of Florida. Dominos is fine for a quick fix, but we needed the real deal. It was time to get to work.

The pan seemed like it was going to be the biggest hurdle. I believed incorrectly that I would need an overpriced specialty pan. Then as luck would have it, while searching through dough recipes, I found that spring form cake pans were perfect for the task. I was also pinched  for time, so while I made the dough from scratch, I let the bread machine do the hard part. The recipe I used is found here on Food.com. Once the bread machine had finished its work and the rising part had completed, we simply shaped it into the pan. I cheated and used a rolling pin to get the process started, but finished by gently pulling the dough to the correct shape as often recommended.

This done, we began layering in our ingredients. This included a pound of mozzarella, onions, green bell pepper, mushrooms, and mini pepperoni slices. Stop this we added our sauce. We like ours chunky and so added a can of red pepper spiced diced tomatoes to the store bought marinara. I finished this off with fresh basil from my window ledge garden. The final topping was a sprinkle of Parmesan cheese.

After about 40 minutes we had ourselves a pretty good dinner. As this was an experiment, there are a few changes to be made next time. We may add ground beef. Also, I will perform the veggies a bit. I also really need to practice with dough. All in all though, this was good. Furthermore, it ended up not costing a lot since it easily made 6 individual meals. I'm definitely keeping this on our menu.

It got a little lopsided, but that's my lack of skill with dough showing.

Shoeless no more

In my normal boring life, I work in a restaurant, mostly in the kitchen area. As you may expect, there are frequently spills and slippery debris on the floors that can lead to painful slips and falls. For that reason, we are require to seal slip resistant shoes. In that past two and a half years I have been through four pairs of shoes. I need a new pair, but money is tight right now, so when the sole of my current pair blew out, I decided the get a little more life out of them by combining two pair of shoes to make use of the best part of both.

Using a heat gun to remove the soles.

All removed

My current shoes are men's oxfords. I love almost everything about them. They're tasteful and not overly masculine. They have the cheapest soles though. I started noticing that my feet kept getting wet and when I investigated, the bottoms had given up the fight. The pair I owned previously didn't fit my look at all, and had begun losing the stitching in the uppers. Also the soles were separating from the uppers, which is what gave me the idea.

How I created the sizes needed.

I used duct tape to hold the new soles to the shoes. Gorilla glue does not bond instantly.

Using a heat gun, I removed the soles from the ugly pair and trimmed away the edging. My current shoes have heels, so I cut the soles to fit the heel and main base of my oxfords, and pulled out the Gorilla Glue. It is important to note that Gorilla Glue expands so use it sparingly. I forgot that fact, so when the glue was dry, I had glue to trim from the edges. I cut it away with my pocket knife. Because the shape of the two shoes were so different, it does look a bit like I am floating, but that's a little fun. Point is, 2 days in,and no one has noticed, and I have dry feet. Total win in my book.

DIY Cat Scratcher? Why not?

While perusing kitten toys, I noticed those cardboard cat scratch boards. I thought to myself, "That's brilliant." That thought was cut short however because my eyes fell to the price on the shelf. Ten dollars for the equivalent of a shoe box lid filled with strips of corrugated cardboard tightly arranged within. I figured this could easily be made for free, and set about proving that theory.

The first step, as I saw it, was finding a containing box. I had a few smaller Amazon boxes around, and so I cut one down to be about 2 1/2 inches tall. For the filler, I cut the flaps from a portable freezer shipping box. It is quite thick and sturdy, and so it seemed perfect. I then cut the flaps into strips matching the height of the box. The strips are folded into accordions to fill the entire container as tightly as possible. This is where things get tricky if you don't have a straight edge, as I found out on my first attempt. The layers are uneven, and that just seems unfinished. Also, it is too small. The test kitten liked it, but only for small stretches as she got frustrated that she couldn't sit on it and scratch at the same time.

So, because all I really did wrong was to take was to be lazy with the project was to think too small and make shortcuts, I was able adapt my same idea. I used a ruler to make the goods in the strips even and used much larger containing bow. It was the lid from a cardboard storage tote. I decided to add a bit of glue in between the slats to keep things neat. Since my test kitten loves it, I plan to dress it up by covering it in fabric, but for now, this is one perfectly serviceable, nearly free cat scratcher.

Meet Willow, the test kitten.

She likes to lounge and scratch here. I feel rewarded.